305 found, showing page 6 of 8
WALL BLK OUTDOOR FIXTURE
1-light wall lantern. Height from center of outlet box is 3". Uses (1) 100 watt Type A medium base bulb, not included.
View Details
1-light wall lantern. Height from center of outlet box is 3". Uses (1) 100 watt Type A medium base bulb, not included.
CHANDELIER******
5-light chandelier. 13-3/4" H. x 24-3/4" diameter, includes 36" of chain and 120" of wire. Uses 5 standard base, torpedo, or G-25, 60W maximum bulbs.
View Details
5-light chandelier. 13-3/4" H. x 24-3/4" diameter, includes 36" of chain and 120" of wire. Uses 5 standard base, torpedo, or G-25, 60W maximum bulbs.
*FIXTURE OUTDOOR
1-light wall lantern. Height from center of outlet box is 3". Uses (1) 100 watt Type A medium base bulb, not included.
View Details
1-light wall lantern. Height from center of outlet box is 3". Uses (1) 100 watt Type A medium base bulb, not included.
*TRIM RECESS FIXTR**************
Step baffle trim for use with Model No. PS1, PS1RM, PS3, PS113, PS126, PS9, DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixtures. Requires (1) R30 or PAR30 light bulb, not included. Compatible with incandescent, PAR30 LED (light emitting diode) or R30 CFL (compact fluorescent) bulbs. Bulb wattage determined by application.
View Details
Step baffle trim for use with Model No. PS1, PS1RM, PS3, PS113, PS126, PS9, DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixtures. Requires (1) R30 or PAR30 light bulb, not included. Compatible with incandescent, PAR30 LED (light emitting diode) or R30 CFL (compact fluorescent) bulbs. Bulb wattage determined by application.
*AB OUTDOOR WALL FIXTURE
1-light jelly jar with clear glass. Height from center of outlet box is 2". Uses (1) 60 watt Type A medium base bulb, not included.
View Details
1-light jelly jar with clear glass. Height from center of outlet box is 2". Uses (1) 60 watt Type A medium base bulb, not included.
*TESTER CONTNUTY
Safety is the number one priority on any job site. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
View Details
Safety is the number one priority on any job site. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
6FT RGB LED TAPE LIGHT
LED (light emitting diode) plug-in tape light with IR remote control. Cuttable and rejoinable every 2 inches for a customized lighting design. IR remote control allows for wireless operation of a variety of colors and lighting effects. Colors can switch between white, red, green, or blue light. Adds accent lighting to kitchens, bedrooms, bookcases, display cabinets, closets, and more. Energy efficient with a rated life of 30,000 hours. Easy to operate inline on/off switch. Features a 60-inch power cord with a 2-prong polarized plug and 3005K color temperature (white). Includes optional connectors for installation around corners and across gaps, 3 block/straight connectors and 3 corner connectors. Non-dimmable, for indoor use only. ETL listed.
View Details
LED (light emitting diode) plug-in tape light with IR remote control. Cuttable and rejoinable every 2 inches for a customized lighting design. IR remote control allows for wireless operation of a variety of colors and lighting effects. Colors can switch between white, red, green, or blue light. Adds accent lighting to kitchens, bedrooms, bookcases, display cabinets, closets, and more. Energy efficient with a rated life of 30,000 hours. Easy to operate inline on/off switch. Features a 60-inch power cord with a 2-prong polarized plug and 3005K color temperature (white). Includes optional connectors for installation around corners and across gaps, 3 block/straight connectors and 3 corner connectors. Non-dimmable, for indoor use only. ETL listed.
*KIT SWAG ANT BRASS
Each kit contains: 12' chain, 15' cord set with switch, 2 swag hooks, and necessary fittings. Poly bagged.
View Details
Each kit contains: 12' chain, 15' cord set with switch, 2 swag hooks, and necessary fittings. Poly bagged.
*CANOPY ANT BRASS
Lighting fixture canopy with 1-1/16 In. center hole. 4-3/4 In. diameter, 1-1/8 In. deep. Antique brass. 1 per card.
View Details
Lighting fixture canopy with 1-1/16 In. center hole. 4-3/4 In. diameter, 1-1/8 In. deep. Antique brass. 1 per card.
FIXTURE CEILING
Flush mount ceiling fixture. Uses (1) 60 watt Type A medium base bulb, not included.
View Details
Flush mount ceiling fixture. Uses (1) 60 watt Type A medium base bulb, not included.
1BULB PB GLOBE FIXTURE
Flush mount, single light ceiling fixture. Uses (1) 60 watt Type A medium base bulb, not included.
View Details
Flush mount, single light ceiling fixture. Uses (1) 60 watt Type A medium base bulb, not included.
WHT OUTDOOR WALL FIXTURE
1-light jelly jar with clear glass. Height from center of outlet box is 2". Uses (1) 60 watt Type A medium base bulb, not included.
View Details
1-light jelly jar with clear glass. Height from center of outlet box is 2". Uses (1) 60 watt Type A medium base bulb, not included.
2 BULB PB CEIL FIXTURE
Flush mount ceiling fixture. Uses (2) 40 watt Type A or G medium base bulbs, not included.
View Details
Flush mount ceiling fixture. Uses (2) 40 watt Type A or G medium base bulbs, not included.
1BULB WH GLOBE FIXTURE
Flush mount, single light ceiling fixture. Uses (1) 60 watt Type A medium base bulb, not included.
View Details
Flush mount, single light ceiling fixture. Uses (1) 60 watt Type A medium base bulb, not included.
TRIM RECESS FIXTR**************
White open trim for use with recessed fixtures. Requires (1) R30 or PAR30 light bulb, not included. Compatible with incandescent, PAR30 LED (light emitting diode) or R30 CFL (compact fluorescent) bulb.
View Details
White open trim for use with recessed fixtures. Requires (1) R30 or PAR30 light bulb, not included. Compatible with incandescent, PAR30 LED (light emitting diode) or R30 CFL (compact fluorescent) bulb.
*TRIM RECESSD FIXTR
Black step baffle for use with model No. DY6420 recessed fixture. 5-3/4" O.D., use with up to (1) 50W R20 bulb.
View Details
Black step baffle for use with model No. DY6420 recessed fixture. 5-3/4" O.D., use with up to (1) 50W R20 bulb.
FIXTURE OUTDOOR
Midtown wall fixture. Basic and functional lighting for added security and illumination. Great value in this classic outdoor fixture. Uses (1) 60 watt A15 medium base bulb, not included.
View Details
Midtown wall fixture. Basic and functional lighting for added security and illumination. Great value in this classic outdoor fixture. Uses (1) 60 watt A15 medium base bulb, not included.
*FIXTURE CEILING
2-light flush mount ceiling fixture with etched glass dome. 6-3/4" H. x 9-1/2" diameter. Uses 2 medium base A-19 60W maximum bulbs. Polished brass.
View Details
2-light flush mount ceiling fixture with etched glass dome. 6-3/4" H. x 9-1/2" diameter. Uses 2 medium base A-19 60W maximum bulbs. Polished brass.
1BULB WHT CEILNG FIXTURE
1-light flush mount ceiling fixture with pull chain and round globe. Uses (1) 60 watt Type A medium base bulb, not included.
View Details
1-light flush mount ceiling fixture with pull chain and round globe. Uses (1) 60 watt Type A medium base bulb, not included.
2BULB WH CEILING FIXTURE
Flush mount ceiling fixture. Uses (2) 40 watt Type A or G medium base bulbs, not included.
View Details
Flush mount ceiling fixture. Uses (2) 40 watt Type A or G medium base bulbs, not included.
*TRIM RECESS FIX
Clear reflector trim for use with Model No. PS3, PS113, PS126, DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixtures. Requires (1) R30 or PAR30 light bulb, not included. Compatible with incandescent, PAR30 LED (light emitting diode) or R30 CFL (compact fluorescent) bulb. Bulb wattage determined by application.
View Details
Clear reflector trim for use with Model No. PS3, PS113, PS126, DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixtures. Requires (1) R30 or PAR30 light bulb, not included. Compatible with incandescent, PAR30 LED (light emitting diode) or R30 CFL (compact fluorescent) bulb. Bulb wattage determined by application.
*CANOPY BRASS
Lighting fixture canopy with 7/16" hole, screw collar loop, mounting screws, crossbar, locknut, and washer. 5-1/8" diameter. 1 per card.
View Details
Lighting fixture canopy with 7/16" hole, screw collar loop, mounting screws, crossbar, locknut, and washer. 5-1/8" diameter. 1 per card.
*KIT SWAG BRASS
Each kit contains: 12' chain, 15' cord set with switch, 2 swag hooks, and necessary fittings. Poly bagged.
View Details
Each kit contains: 12' chain, 15' cord set with switch, 2 swag hooks, and necessary fittings. Poly bagged.
WHT ATHENA TRACK FIXTURE
Line voltage die-cast aluminum cylinder fixture. Athena is a rear loading gimble track fixture which provides directional light source for special aiming and assures secure lock on angle position.
View Details
Line voltage die-cast aluminum cylinder fixture. Athena is a rear loading gimble track fixture which provides directional light source for special aiming and assures secure lock on angle position.
BNKL APOLO TRACK FIXTURE
Line voltage die-cast aluminum cylinder fixture with front loading MR16 light source. Apollo provides directional light source for special aiming and assures secure lock on angle position.
View Details
Line voltage die-cast aluminum cylinder fixture with front loading MR16 light source. Apollo provides directional light source for special aiming and assures secure lock on angle position.
PB OUTDOOR WALL FIXTURE
1-light jelly jar with clear glass. Height from center of outlet box is 2". Uses (1) 60 watt Type A medium base bulb, not included.
View Details
1-light jelly jar with clear glass. Height from center of outlet box is 2". Uses (1) 60 watt Type A medium base bulb, not included.
WHT APOLLO TRACK FIXTURE
Line voltage die-cast aluminum cylinder fixture with front loading MR16 light source. Apollo provides directional light source for special aiming and assures secure lock on angle position.
View Details
Line voltage die-cast aluminum cylinder fixture with front loading MR16 light source. Apollo provides directional light source for special aiming and assures secure lock on angle position.
2BULB WHT WALL FIXTURE
Includes 1 outlet receptacle. Uses (2) 60 watt Type A medium base bulbs, not included.
View Details
Includes 1 outlet receptacle. Uses (2) 60 watt Type A medium base bulbs, not included.
CONTINUITY TESTER
Testing for voltage to any eletrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.
View Details
Testing for voltage to any eletrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.
TRIM RECESSD FIXTR**************
Enclosed trim for use with Model No. PS1, PS1RM, PS3, DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixture housings. Requires (1) 60 watt incandescent A19 bulb. This trim is for NON-IC (insulation contact) applications only. Aluminum trim ring ideal for use above showers, indoor wet location rated. White albalite (heavy plastic).
View Details
Enclosed trim for use with Model No. PS1, PS1RM, PS3, DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixture housings. Requires (1) 60 watt incandescent A19 bulb. This trim is for NON-IC (insulation contact) applications only. Aluminum trim ring ideal for use above showers, indoor wet location rated. White albalite (heavy plastic).
BLACK OUTDOOR FIXTURE
Porch light with clear glass. Uses (1) 60 watt Type A medium base bulb, not included.
View Details
Porch light with clear glass. Uses (1) 60 watt Type A medium base bulb, not included.
400A/600V AC DIGITAL CLAMP METER
A.W. Sperry 5-function 9-range 400A digital clamp meter is a Digital snap-around (DIGISNAP ) volt-Ohm-Ammeter. UL listed to both U.S.A. and Canadian Standards. Meets CE (European Conformity) requirements, auto power Off (sleep), high accuracy, digital ready, continuity, data hold, recessed safety designed input terminals. Includes test leads, 2 "AAA" batteries, carrying case, and operating instructions. The Professional's choice digital multimeter can be used to check and test outlets, fuses, wires, appliances, motors, batteries, and electronics. Designed for residential/ commercial, utility/industrial, voice/datacom, and auto/marine.
View Details
A.W. Sperry 5-function 9-range 400A digital clamp meter is a Digital snap-around (DIGISNAP ) volt-Ohm-Ammeter. UL listed to both U.S.A. and Canadian Standards. Meets CE (European Conformity) requirements, auto power Off (sleep), high accuracy, digital ready, continuity, data hold, recessed safety designed input terminals. Includes test leads, 2 "AAA" batteries, carrying case, and operating instructions. The Professional's choice digital multimeter can be used to check and test outlets, fuses, wires, appliances, motors, batteries, and electronics. Designed for residential/ commercial, utility/industrial, voice/datacom, and auto/marine.
*1BULB BRONZE WALL FIXTURE*****
1-light wall fixture in ebony bronze finish and aged alabaster glass. 9-1/4" H. x 7" W., extends 8" with 72" cord. Uses 1 standard base A-19 100W maximum bulb. Hardwired only.
View Details
1-light wall fixture in ebony bronze finish and aged alabaster glass. 9-1/4" H. x 7" W., extends 8" with 72" cord. Uses 1 standard base A-19 100W maximum bulb. Hardwired only.
2BLB BRZ CEILING FIXTURE****
2-light flush mount ceiling fixture with ebony bronze finish and aged alabaster glass. 6" H. x 13" diameter. Uses 2 standard base A-19 60W maximum bulbs.
View Details
2-light flush mount ceiling fixture with ebony bronze finish and aged alabaster glass. 6" H. x 13" diameter. Uses 2 standard base A-19 60W maximum bulbs.
4" CCT LED RCS LIGHT KIT
4" CCT LED RCS LIGHT KIT
View Details
4" CCT LED RCS LIGHT KIT
6FT WHT LED TAPE LIGHT
White LED (light emitting diode) plug-in tape light. Cuttable and rejoinable every 2 inches for a customized lighting design. Adds accent lighting to kitchens, bedrooms, bookcases, display cabinets, closets, and more. Energy efficient witha rated life of 30,000 hours. Easy to operate inline on/off switch. Features a 60-inch power cord with a 2-prong polarized plug and 3111K color temperature. Includes optional connectors for installation around corners and across gaps. Non-dimmable, for indoor use only. ETL listed.
View Details
White LED (light emitting diode) plug-in tape light. Cuttable and rejoinable every 2 inches for a customized lighting design. Adds accent lighting to kitchens, bedrooms, bookcases, display cabinets, closets, and more. Energy efficient witha rated life of 30,000 hours. Easy to operate inline on/off switch. Features a 60-inch power cord with a 2-prong polarized plug and 3111K color temperature. Includes optional connectors for installation around corners and across gaps. Non-dimmable, for indoor use only. ETL listed.
2-HEAD LED EMERGENCY LIGHT
LED (light emitting diode) emergency light featuring advanced optical design and electronic technology for high quality light output in any emergency. Includes aimable optics with 220-lumen linear pattern and up to 33-foot spacing. Ideal for wall and ceiling mount applications. Features nickel cadmium battery, dual-voltage AC input (120/277V, 60Hz), and quick-mount installation. Damp location listed 50 deg (degrees) F (Fahrenheit) to 104 deg F. California Title 20 compliant.
View Details
LED (light emitting diode) emergency light featuring advanced optical design and electronic technology for high quality light output in any emergency. Includes aimable optics with 220-lumen linear pattern and up to 33-foot spacing. Ideal for wall and ceiling mount applications. Features nickel cadmium battery, dual-voltage AC input (120/277V, 60Hz), and quick-mount installation. Damp location listed 50 deg (degrees) F (Fahrenheit) to 104 deg F. California Title 20 compliant.
TRIM RECESS FIXTR***************
Open trim for use with model No. DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixtures. 8" O.D., use with up to (1) 75W R30 bulb.
View Details
Open trim for use with model No. DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixtures. 8" O.D., use with up to (1) 75W R30 bulb.
*TRIM RECESSD FIXTR*************
Adjustable spot trim for use with recessed fixtures. Ideal for accent lighting. Requires (1) R30 or PAR30 light bulb, not included. Compatible with PAR30 LED (light emitting diode) or R30 CFL (compact fluorescent) bulb. Wattage requirements vary depending on housing and application.
View Details
Adjustable spot trim for use with recessed fixtures. Ideal for accent lighting. Requires (1) R30 or PAR30 light bulb, not included. Compatible with PAR30 LED (light emitting diode) or R30 CFL (compact fluorescent) bulb. Wattage requirements vary depending on housing and application.
TRIM RECESS FIXTR***************
Adjustable spot trim for use with model No. DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixtures. 8" O.D., uses up to (1) 75W R30 bulb.
View Details
Adjustable spot trim for use with model No. DY6430, DY6431, DY6433, DY6434, DY6440, and TR1 recessed fixtures. 8" O.D., uses up to (1) 75W R30 bulb.
